A Kestrel company - serving Austin, TX

Guardsman Duct Sealing & Repair Nationwide

Whole-home duct cleaningWhole-home duct cleaning
Dryer vent cleaningDryer vent cleaning
Camera inspectionCamera inspection
Sanitizing & deodorizingSanitizing & deodorizing
Every visit starts with

Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents

Worth knowing

That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.

Get your free estimate

Guardsman Duct Sealing & Repair: The Austin Owner’s Guide

Guardsman duct sealing and repair in Austin typically runs between $350 and $950 installed, depending on how much of your ductwork has pulled apart, cracked, or lost its seal. We stock Guardsman-compatible mastic, foil tape, and replacement collars on our trucks, so most sealing jobs are completed the same day we arrive. What usually brings Austin homeowners to this page is a familiar sequence: a room that never cools right, a power bill that keeps climbing, and dust settling on furniture days after cleaning.

Call (254) 848-6913

The frustrating part is that most people don’t discover the problem by looking at their ducts. They discover it by paying for cooled air that disappears into an attic or crawlspace before it ever reaches the bedroom. In Austin’s climate, where air conditioners run hard from May through October, a duct system losing 20 to 30 percent of its conditioned air is money leaking through sheet metal seams and old tape joints every single day.

Dale Whitmore has spent years tracing these leaks across Austin homes, from older Craftsman layouts near Hyde Park to newer builds south of the river. The pattern is consistent: the ducts are solid, but the sealing has given up. That’s the work we do.

Which Guardsman Models This Applies To

Guardsman duct sealing applies across their residential flex-duct and rigid sheet metal product lines, but the parts you need depend on which version of their system your home uses. The Guardsman brand has carried several series over the years, and the sealing components don’t always interchange cleanly between them.

Here’s the compatibility gotcha we see most often in Austin: older Guardsman systems from the mid-2000s used a round metal collar with a neoprene gasket that slides inside the duct opening. Newer Guardsman series moved to an integrated collar system with a wider flange and a butyl-backed gasket. The two are not interchangeable. If you’re replacing a failed collar, you need to match the outside diameter to the quarter inch. Bring a measurement or a photo of the old part, and we’ll match it.

For duct sealing specifically, Guardsman systems use a water-based mastic rated for UL 181 compliance, the standard for sealing HVAC duct seams. We stock Guardsman-branded mastic and a compatible two-ply foil tape that matches its adhesion profile. If you’re open to a quality aftermarket option, we also carry Hardcast and RectorSeal equivalents that perform identically and often cost less. The decision is yours; we’ll quote both ways.

Explore

Styles & brands we work with

Whole-home duct cleaning
Whole-home duct cleaning
Dryer vent cleaning
Dryer vent cleaning
Camera inspection
Camera inspection
Sanitizing & deodorizing
Sanitizing & deodorizing

Signs Your Guardsman Duct Sealing & Repair Is Failing

  • Uneven room temperatures. One bedroom stays hot while the living room freezes. This usually means a supply duct has separated at the collar or a seam has opened, dumping conditioned air into the attic instead of the room. The fix is reconnecting the duct and re-sealing the joint.
  • Dust accumulation on furniture within days of cleaning. When supply ducts pull apart, the negative pressure created by the blower draws attic dust, fiberglass particles, and insulation into the airflow. Your registers are pumping attic air into the house. Sealing those gaps stops the contamination at the source.
  • Visible separation in attic ducts. If you see flex ducts with sagging sections or metal ducts with tape peeling at the seams, the seal has failed. In Austin’s attic temperatures, which regularly exceed 130 degrees in August, adhesive tapes dry out and fail at a rate that surprises most homeowners.
  • Higher cooling bills with no change in usage. A duct system leaking 25 percent of its air means your AC runs longer to hit the thermostat setting. That’s a direct, measurable cost. Sealing the ducts restores the system’s efficiency without touching the AC unit itself.
  • Whistling or hissing sounds near duct runs. Air escaping through a narrow gap makes noise. If you hear it in a specific wall or ceiling area, there’s a breach worth sealing. The sound usually disappears once the seam is properly closed with mastic.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Most Guardsman duct sealing and repair jobs in Austin run between $350 and $950 installed. Here’s what drives the range:

  • Number of leaking joints: A single separated collar might be a one-hour job. Ten failed seams across multiple duct runs takes substantially longer.
  • Access conditions: Ducts in a roomy, floored attic are faster to reach than ducts buried under blown-in insulation in a tight crawlspace. Austin homes built in the 1960s and 1970s often have the second scenario.
  • Material requirements: Mastic and tape are inexpensive. Replacement collars, grilles, and sections of damaged flex duct cost more. We quote the materials at cost and the labor as a fixed line item.

Every job includes a written price before any work begins. That’s not a special occasion thing; it’s how Kestrel Air Duct Austin has operated since 2004 under the Kingswell Guarantee. You’ll see the number, approve the number, and that’s the number you pay. The work is backed by our 365-Day Done Right Promise: if the sealing fails within the guarantee period, we return and make it right at no charge, in writing.

DIY or Call Us?

For ducts, there are some checks you can do safely. Go into your attic on a cool morning and visually inspect what you can reach without moving insulation or walking off the designated walkway. Look for disconnected flex ducts, peeling tape, or obvious gaps at the plenum connections. Take photos. That’s useful information.

What we’d caution against is trying to re-seal ducts yourself in an Austin attic during summer. Attic temperatures climb past 130 degrees, heat exhaustion comes on fast, and disrupting blown-in insulation or walking through a ceiling joist bay is a real hazard. Beyond the safety concern, there’s a practical one: most DIY sealing fails because the surface wasn’t correctly prepared. Mastic doesn’t bond to dust, and tape applied over old adhesive residue peels within a season. We do this work with proper cleaning, brushing, and application technique under the Kingswell Way code: say the price, show up in the window we gave, leave the place cleaner, and put the guarantee in writing.

If you’re unsure what you’re looking at, call us at (254) 848-6913. We’ll talk through what you found and give you an honest take on whether it needs a pro.

FAQs

Need Air Duct Cleaning help in Austin? Licensed & insured · Flat quoted pricing response · free estimates
Call (254) 848-6913
Local Service Coverage

Request a Free Estimate in Austin

Tell us what you need - Kestrel Air Duct Austin responds fast. No obligation.

By providing your information above, you agree to the terms of our Privacy Policy and consent to receive communications by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch